General terms | Privacy statement | Info Sound Insulation | Sitemap | Links | Contact   



  Home Car Boat House Studio&Hifi Products Specials
       Noise problems House      Products House     


Neighbour noise (next door neighbours)


When you get irritated by your neighbours noise, that can have two causes: your neighbours are making a lot of noise or the wall is not thick enough. The latter is the case in older houses (mostly with only single brick separation wall).

With exception of contact noise( see below on this page) the best solution is to build with a Merfoflex Pre-made Partition.

The Merfoflex Pre-made Partition is a ‘ floating floor’. It is placed completely vibration free from walls and ground. With this you get much higher noise insulation values than by the placing of a fixed pre-made partition. Download the installation manual guide to see how you assemble a Merfoflex-partition.

With our Merfoflexcalculator u get a manual adjust to your needs. Click <here> to start the calculator

Exception: contact noise

When noise is transferred to the construction via the floor (for example because the neighbour plays piano/drum) the nuisance noise by your neighbour can be better limited by placing a floating floor. If after this you still experience nuisance noise you can additionally place a Merforflex Pre-made Partition.

For a floating floor Aggloper plates (floating floor, 30 mm thick) are laid loose on the already existing floor. There are 2 lMultiplex layers above. These must be connected to each other (glued and/or screwed), with the seams staggered. These plates of Multiplex can't have any direct contact with the existing floor and partition; for that a contact bridge is inserted. To connect the contract bridge with the partition you can use of Agglomer (Stripes). The finished floor can then be laid over the Multiplex plates.

If you are annoyed by the footsteps of your neighbour, then it can make a big difference when your neighbour lays Agglomer (Parquet) under his hard floors. This is only 10 mm thick

We hope that you can come to an agreement with your neighbours by yourself. In the case that this isn’t working and you want to know your rights and/or obligations then you can contact the nederlandse stichting geluidshinder (NSG).



Products


Merfoflex Partition
MDF + Agglomer
Length: 137 cm, width: 6 cm
Thickness: 6 cm
more info >>
 
Agglomer Strip (Self-adhesive)
Colour: Multi-coloured, Thickness: 10 mm
Length: 200 cm, Width: 5 cm
Weight: 0,15 kg/m
Non self-adhesive
more info >>
 
Merfoflex Akotherm
Colour: White, Thickness: 60 mm
Dimensions: 120 x 54 cm = 0,65 m2
Weight: 1,20 kg/m2, Non self-adhesive
more info >>
 
Merfoflex Clips
Clips for mounting the Merfoflex partitions on the wall
Sold a piece
more info >>
 

print

© Merford Akoestiekwinkel.nl


Sound